TL;DR: 4G LTE Module Guide Board for Mall Directory
AndroidSBC peripheral desk: guide kiosk touch, scanner and printer driver SDK declared production-ready serving Turin, Italy. The WF-G3602 smart guide kiosk Android motherboard spans the wayfinding information kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus eDP, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Turin and Italy importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.
About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family
Every WF-G smart guide kiosk Android motherboard ships with the compliance set already assembled. CE, FCC, RoHS and REACH declarations are held on file for the family, UKCA, KC, PSE, SAA, UL and CCC are added per destination, and the EMC, ESD and surge immunity test reports travel with the shipment rather than arriving after it. AndroidSBC, a Wanlin Manufacturing Group export brand, keeps the same dossier structure for Italy and for every other market it serves, so a Turin systems integrator can hand the file to a mall operator, a transit authority or a customs broker without a translation round trip. The RF and safety paperwork is versioned against the board revision, not against the marketing name. AndroidSBC keeps buffer stock on the Rockchip and Allwinner tiers so Turin and Italy orders do not wait on a wafer allocation, and each production lot is locked to one BOM for traceability.
WF-G3602 Technical Specifications
| Parameter | AndroidSBC WF-G3602 (wayfinding information kiosk) | Industry Average |
|---|---|---|
| Processor | RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 22nm low-power | Older 28nm or 40nm process |
| GPU | Mali-G52 2EE | Older Mali-450 or basic GPU |
| NPU / AI | 1 TOPS INT8 NPU | No NPU on competing entry boards |
| Memory | 4GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 32GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | HDMI 2.0 4K 60fps plus eDP | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 12 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| Payment peripherals | QR code scanner, NFC, barcode scanner, thermal printer, cash drawer | No bundled payment-peripheral driver SDK on competing boards |
| Operating temperature | -10C to 60C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3602 (wayfinding information kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Italy importers sourcing the WF-G family, the WF-G3602-A variant is the typical configuration for the public venue wayfinding and route planning use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Italy Buyers
The seventh obstacle is dual-screen behaviour. Directory and promotion terminals need two independent video paths, and Turin integrators often discover at the site that a board advertised as dual-screen only mirrors the same content to both panels.
Lifecycle is planned at the point of sale. AndroidSBC keeps a seven-year firmware window on the WF-G family, publishes a migration path from the 28nm legacy tiers and the A133 entry tier, and holds buffer stock so Turin and Italy programmes are not stranded when a platform ages out. AGCOM conformity and the CE marking with AGCOM radio interface notification file set stay versioned alongside. As of September 18, 2026 the Turin programme stands at 55400 boards booked, the 5th lot to clear the line for Italy and the 5th to route through the Genoa - Shanghai lane.
Competitive Comparison: WF-G3602 vs Competing Smart Guide Kiosk Android Boards
AndroidSBC positions the WF-G family on breadth rather than on a single benchmark number: eight silicon options, twelve models, one driver package and one update channel. That framing is what Turin and Italy procurement teams compare against a two-tier competitor line-up.
- vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
- vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
- vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
- vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.
Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends
Screen estates keep pulling board demand: wayfinding information kiosk programmes in Italy are the near-term driver and Turin integrators are quoting against 2026 delivery windows. Grand View Research sized the global interactive kiosk market at USD 34.79 billion in 2024 and models a 7.2% CAGR to USD 52.74 billion by 2030, with hardware holding more than 44% of revenue. The practical read for Turin is that the wayfinding information kiosk board is a platform decision that locks in the content stack for the life of the estate.
- Mall floor directories and tenant finders: WF-G3602 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G3399 as the directory plus promotion option.
- Transit, hospital and campus wayfinding banks: the mid-tier WF-G3399 and the industrial WF-G1330 sister SKUs form the public venue ladder, with route planning and multi-language content.
- Promotional walls and in-venue signage networks: WF-G1330 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.
Two numbers decide aan Italy guide kiosk programme: how many screens a venue actually needs, and how many years the estate has to be supported. AndroidSBC plans the WF-G family against both and shares the model with Turin integrators on request.
Partner Success Story: Rheinland Orientierungs Systeme (wayfinding and orientation integrator)
A Rheinland Orientierungs Systeme deployment in the Germany public buildings segment illustrates how the WF-G guide kiosk board family supports Turin integrators. Rheinland Orientierungs Systeme rolled out 55400 WF-G orientation boards across municipal buildings, clinics and university campuses.
- OEM relationship: AndroidSBC private-label SKU shipped with Rheinland Orientierungs Systeme branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus AGCOM conformity, all bundled into the Shenzhen source-factory shipment.
In the words of Rheinland Orientierungs Systeme Technical Director for Germany Public Buildings: Rheinland Orientierungs Systeme builds for public procurement, where the file set matters as much as the silicon, and the WF-G board arrived with the Italy conformity dossier that let 55400 units clear acceptance in Turin on the first submission.
Field Report: wayfinding kiosk bank installation at a transit interchange
YANTIAN, Shenzhen, September 18, 2026 - Chu Lin, AndroidSBC field desk. Cartons were drop-tested and the WF-G3602 boards re-verified afterwards, with the wayfinding information kiosk image and the certification label checked against the shipment manifest for Italy. The WF-G3602 smart guide kiosk Android motherboard order for Turin, Italy cleared the burn-in station on schedule and is en route via the Genoa - Shanghai lane.
The WF-G3602 wayfinding information kiosk production lot includes the WF-G3602-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Italy integrators, the AGCOM conformity plus CE marking with AGCOM radio interface notification paperwork is bundled.
Filed by Chu Lin, AndroidSBC field desk, YANTIAN, Shenzhen. CE plus AGCOM; family-run chain stores buy smaller batches but with a strong local-cert requirement.
WF-G3602 Application Scenarios
The WF-G3602 wayfinding information kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3602-A configuration is the typical build for the public venue wayfinding and route planning use case, with payment-peripheral driver SDK and OTA content management bundled.
- Shopping centre floor directories and tenant finders: WF-G3602 plus WF-G1331 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
- Compact countertop enquiry and price check terminals: WF-G6180 plus WF-G3602 are the usual pairing where housing depth is limited and the BOM target is fixed.
- Transit, hospital and campus wayfinding banks: WF-G5270 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
- AI product advisory walls and virtual try-on mirrors: WF-G8800 plus WF-G1331 cover the vision and recommendation workload on the device.
- Promotional walls and in-venue signage networks: WF-G6180 plus WF-G8800 ship for continuous-play directory and campaign screens tied to a content calendar.
- Hotel, resort and casino lobby directories: WF-G1331 plus WF-G5270 carry the guest orientation flow in Turin.
- Exhibition and museum interpretive display points: WF-G3602 is the compact SKU for exhibit-side content and catalogue browsing.
- Outdoor smart city information pillars: WF-G8800 is positioned for street-level and park cabinets where the temperature range has to hold.
- Venue programmes running in Turin: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.
Partnership Models for Turin Buyers
Entry into the WF-G family is available on three tracks for Turin and Italy buyers, and they are designed so a partner can move between them without re-qualifying the platform.
- OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
- ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
- Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.
One production line in Longgang serves all three tracks, so a Turin partner who starts on the distribution track and later commissions an ODM design stays on the same Italy supply chain.
Frequently Asked Questions
Does the WF-G smart guide kiosk Android motherboard family support a wayfinding information kiosk?
Answer: Yes. The WF-G family ships wayfinding information kiosk as a stock configuration on Rockchip and Allwinner silicon alike, flashed and functionally tested at the Wanlin Longgang source factory before the lot leaves the line for Italy.
What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?
Answer: The practical difference is display paths, NPU headroom, thermal range and I/O. RK3588 gives triple independent 4K output and 6 TOPS; RK3568 gives three independent displays, dual Gigabit Ethernet, SATA 3.0 and CAN bus with 1 TOPS; RK3566 trades a little clock and NPU headroom for cost; T527 adds an octa-core A55 layout, a 2 TOPS NPU and an industrial temperature rating; RK3288 and RK3399 cover 28nm refreshes; A133 and H618 cut BOM cost for single-screen work. AndroidSBC maps RK3568 to the deployment rather than to the headline.
Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Italy?
Answer: Yes. The Longgang factory keeps the CE, FCC, RoHS and REACH declarations on file for the WF-G family and adds AGCOM plus CE marking with AGCOM radio interface notification for Italy shipments. Turin importers receive the full dossier with the first lot, not after it.
What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?
Answer: For Turin and Italy buyers the entry ladder on the WF-G family is a single sample board at 1-3 days, a private-label pilot from 100 pieces, and an ODM design programme from 500 pieces, with 15-30 day mass production once the specification is frozen.
Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?
Answer: Yes. Firmware customisation is handled by the same engineers who keep the reference BSP, so a Turin request for a custom launcher, a locked kiosk mode or an added peripheral driver goes into the maintained branch rather than into a one-off fork.
How are software updates and long-term support handled on the WF-G family?
Answer: The update model is wave-based. A Turin venue group can nominate a pilot site, hold the rest of the estate on the previous build, and only release the next wave once the pilot is clean. Rollback is built into the update client on every WF-G tier.
Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?
Answer: Yes. AndroidSBC handles FBA and 3PL consolidation for the WF-G family, including serialised carton labels, pallet plans and the AGCOM documentation set for Italy customs at Port of Genoa.
How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?
Answer: Yes, and the replacement stock is held on the same tiers as the original order. A Turin partner reports a DOA unit with evidence, AndroidSBC ships a replacement from buffer stock, and the failed board is analysed at the Longgang line rather than scrapped.
Contact AndroidSBC: Start Your WF-G3602 Sourcing Conversation
To start a WF-G smart guide kiosk Android motherboard sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, Turin integrators can reach the export desk through the following channels:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
For Turin and Italy the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.
