TL;DR: POS Motherboard for Restaurant Chains
AndroidSBC export desk: OEM, ODM and distribution tracks open on the WF-P POS board family serving Turin, Italy. The WF-P3602 POS Android motherboard spans the mobile handheld POS with 4G and barcode engine and eleven sister models in the WF-P series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, MIPI DSI output at 720p, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Turin and Italy importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.
About AndroidSBC and the POS Android Motherboard Family
AndroidSBC designs the WF-P POS motherboards around the peripherals that a counter already owns: the thermal printer over RS232 or USB, the barcode scanner, the cash drawer on RJ11, the customer display on a second LVDS lane, and the payment reader on USB or serial. The Turin integrator re-uses the existing harness instead of rewiring the counter. Peripheral validation happens on the Longgang bench with the actual printer, scanner and drawer models the Turin integrator intends to use, and the result is written into the shipment file rather than left to the integrator to discover on site.
WF-P3602 Technical Specifications
| Parameter | AndroidSBC WF-P3602 (mobile handheld POS with 4G and barcode engine) | Industry Average |
|---|---|---|
| Processor | RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 22nm | Older 28nm or 40nm process |
| GPU | Mali-G52 2EE | Older Mali-450 or basic GPU |
| NPU / AI | 1 TOPS | No NPU on competing entry boards |
| Memory | 4GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 32GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | MIPI DSI output at 720p | Single HDMI 1080p only on competing boards |
| Touch support | 5-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 13 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| POS peripherals | Thermal printer, receipt printer, barcode scanner, cash drawer, customer display | No bundled printer, scanner or drawer driver SDK on competing boards |
| Operating temperature | -10C to 55C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3602 (mobile handheld POS with 4G and barcode engine) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Italy importers sourcing the WF-P family, the WF-P3602-A variant is the typical configuration for the tableside ordering handheld rollout use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing POS Android Motherboards for Italy Buyers
Most Turin buyers start with three shortlisted Chinese factories and discover that two of them are trading companies quoting a board they do not build. The sample arrives, the second batch does not match, and nobody can produce the test record.
Dual-screen is a hardware capability on the WF-P family, not a marketing line. The RK3576 and RK3568 tiers carry independent framebuffers on two lanes, so the cashier screen runs the transaction while the customer display runs its own content at its own resolution. The 5th container of WF-P boards for Turin left the Longgang dock on September 23, 2026 carrying 184600 units, routed through the Genoa - Shanghai lane with the compliance file and the peripheral driver set already packed.
Competitive Comparison: WF-P3602 vs Competing POS Android Boards
The WF-P family was specified against the failure modes Turin chains reported on previous rollouts, which is why the comparison reads the way it does.
- Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
- Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.
Global POS Terminal and Smart Checkout Market Trends
The Italy picture follows the global pattern: cashless adoption sets the demand, and the replacement of legacy registers sets the volume. A Turin integrator who can offer a board that drops into an existing enclosure wins on installation cost as much as on unit price.
- Entry counter tier: WF-P3602 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
- Dual-screen mainstream tier: WF-P7601 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
- AI and unattended tier: WF-P7602 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.
The eight-tier WF-P line exists because Turin rollouts are not uniform. One chain will use four of the twelve models, and the point is that all four share one driver contract.
Partner Success Story: Rheinland Kassen Systeme (discount chain checkout integrator)
The Rheinland Kassen Systeme case in the German discount retail segment is a working example of how the WF-P family from AndroidSBC supports Turin integrators. Rheinland Kassen Systeme rolled out 184600 WF-P boards across 132 discount store lanes.
- OEM relationship: AndroidSBC private-label SKU shipped with Rheinland Kassen Systeme branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus AGCOM conformity, all bundled into the Shenzhen source-factory shipment.
As Rheinland Kassen Systeme Head of Checkout Hardware for German Discount Retail put it: Rheinland Kassen Systeme runs the TSE fiscal export interface on the WF-P board, and 184600 units were accepted into the Turin discount group after the bench validation.
Field Report: tableside ordering handheld rollout at a casual dining group
SHENZHEN, September 23, 2026 - Dian Mo, AndroidSBC field desk. The WF-P3602 shipped with staged OTA enabled, so the Italy team can pilot an update on ten lanes before releasing it across the estate. The WF-P3602 POS Android motherboard order for Turin, Italy cleared the burn-in station on schedule and is en route via the Genoa - Shanghai lane.
The WF-P3602 mobile handheld POS with 4G and barcode engine production lot includes the WF-P3602-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Italy integrators, the AGCOM conformity plus CE marking with AGCOM radio interface notification paperwork is bundled.
Filed by Dian Mo, AndroidSBC field desk, SHENZHEN. Italian buyers require the RT fiscal printer handshake documented, plus Italian VAT wording on the receipt template.
WF-P3602 Application Scenarios
The WF-P3602 mobile handheld POS with 4G and barcode engine sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3602-A configuration is the typical build for the tableside ordering handheld rollout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.
- Supermarket and hypermarket checkout: the WF-P3602 drives the cashier screen while the second lane carries the customer display or the promotion wall in Turin.
- Convenience and small format stores: the WF-P3288 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
- Restaurants and quick service: the WF-P3399 runs the order screen plus a kitchen display output, with the customer display showing the order total.
- Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
- Unattended retail and vending: the WF-P1330 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
- Fuel forecourts and parking: the WF-P6180 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
- Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
- AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
- Retrofit programmes in Turin: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.
Partnership Models for Turin Buyers
AndroidSBC does not force a track on Italy partners. The three below are the ones that actually get used.
- Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
All three tracks give Turin partners the same thing underneath: a factory-built board, a frozen BOM and a firmware window measured in years rather than months.
Frequently Asked Questions
Does the WF-P POS Android motherboard family support a mobile handheld POS with 4G and barcode engine?
Answer: It is. The WF-P family was specified around mobile handheld POS with 4G and barcode engine, and every board in the family is validated on that use case before it leaves the Longgang factory.
Which silicon tiers are available in the WF-P family for Italy buyers?
Answer: Eight tiers are available: the Rockchip RK3576 on 8nm, the RK3568 and RK3566 on 22nm, the RK3288 and RK3399 on 28nm, and the Allwinner A133, H618 and T527. The RK3568 tier is the one specified for this configuration.
Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?
Answer: Yes. A single WF-P board drives the thermal or receipt printer, the barcode or QR scanner, the cash drawer on RJ11 or RJ12, and the customer display, with all drivers bundled in the source-factory shipment.
What is the minimum order quantity and the sample lead time for Italy?
Answer: AndroidSBC takes single-board sample orders with a 1-3 day lead, then a 15-30 day mass-production lead on bulk orders. The MOQ for private-label work is agreed per SKU.
Is custom ROM, boot logo or pre-installed app development available?
Answer: AndroidSBC supports custom Android AOSP builds, Linux BSP porting, boot logo and animation work, pre-installed apps and custom UI, and locks the result as the production image.
How are firmware updates delivered to aan Italy estate after deployment?
Answer: Updates are delivered through a staged OTA channel: the Turin partner pilots on a small group of lanes, holds the rest, and rolls back the image if the pilot shows a regression.
What shipping terms does AndroidSBC support for Italy orders?
Answer: AndroidSBC supports FOB Shenzhen, CIF and EXW pricing, and books the shipping lane against a production slot so the Turin delivery date holds.
What happens if a board fails in the field in Italy?
Answer: The warranty path starts from the serial number. The Italy partner files the RMA, AndroidSBC traces the lot and the test record, and a replacement ships on the same configuration.
Contact AndroidSBC: Start Your WF-P3602 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-P POS board family. Turin integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Italy buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-P family.
