TL;DR: MIPI DSI Payment Terminal Motherboard with Android 13
AndroidSBC OEM partnership announcement extending smart payment terminal board availability serving international market, Italy. The WF-SPT-05 smart payment terminal Android motherboard covers the dual-screen smart payment terminal build for chain checkout and eleven sister configurations in the WF-SPT series, spanning the RK3576 quad-core ARM Cortex-A72 2.2GHz plus quad-core ARM Cortex-A53 1.8GHz SoC with the ARM Mali-G52 MC3 GPU, 8-inch 1280x800 eDP main panel plus 4-inch customer screen, and Android 14 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to international market and Italy importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.
About AndroidSBC and the Smart Payment Terminal Android Motherboard Family
The smart payment terminal Android motherboard family from AndroidSBC is specified for the way Italy acquiring actually works - contactless first, QR close behind, receipt on paper, firmware signed, estate managed remotely. international market buyers get that as a standard baseline rather than as a paid engineering change. Every configuration ships with the same Android build, the same peripheral contract and the same test report format, so a international market quality team that has signed off one WF-SPT board can read the next one without a new learning curve.
WF-SPT-05 Technical Specifications
| Parameter | AndroidSBC WF-SPT-05 (dual-screen smart payment terminal build for chain checkout) | Industry Average |
|---|---|---|
| Processor | RK3576 quad-core ARM Cortex-A72 2.2GHz plus quad-core ARM Cortex-A53 1.8GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 8nm | Older 40nm process |
| GPU | Mali-G52 MC3 | Older Mali-400 or basic 2D GPU |
| Memory | 8GB LPDDR5 | DDR3 512MB or 1GB on competing boards |
| Storage | 128GB eMMC plus TF card up to 256GB | NAND flash 4GB or 8GB on competing boards |
| Display and touch | 8-inch 1280x800 eDP main panel plus 4-inch customer screen with 10-point capacitive touch with glove and wet-finger support | 4.3-inch 480x800 panel with resistive touch |
| Payment and capture | NFC contactless, IC card, magnetic stripe and QR with secure element | Camera-only QR capture with no scan engine |
| Printer and peripherals | 80mm thermal printer header with 180mm per second output | No printer control header on competing boards |
| Wireless and positioning | dual-band WiFi 6 with Bluetooth 5.4 and optional 5G sub-6 modem | Single-band 2.4G WiFi 802.11n with no modem |
| Interfaces | 1 USB Type-C host and OTG, 2 USB host, 1 RS232, 1 HDMI out, 8 GPIO, 1 thermal printer header | One USB port and no RS232 |
| Operating system | Android 14 with AOSP baseline and optional GMS | Android 9 or Android 10 on competing boards |
| Power and reliability | 12V DC input with 5V/3A peripheral rail, dual-cell RTC and watchdog, -20C to 60C operating ambient | No battery management and no watchdog |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-05 (dual-screen smart payment terminal build for chain checkout) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Italy importers sourcing the WF-SPT family, the WF-SPT-05-A variant is the typical configuration for the hypermarket and supermarket chain checkout lanes use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Smart Payment Terminal Android Motherboards for Italy Buyers
Payment hardware in Italy is bought against a certification calendar, not a marketing calendar. The board that wins is the one whose compliance file, firmware signing chain and key handling documentation are ready before the acquiring partner asks for them.
Certification is not a one-time event in Italy. When the acquiring partner updates a kernel version or a contactless limit, the international market integrator needs a board supplier who can reissue the file rather than renegotiate the design. For the international market buyer the test is simple - order 63500 boards as a sample lot, run them against the printer, the reader and the scan engine the project actually uses, and check whether the delivery file matches the pallet. AndroidSBC ships 63500 boards on the Genoa - Shanghai lane with the paperwork already attached.
Competitive Comparison: WF-SPT-05 vs Competing Smart Payment Terminal Motherboards
Competing boards in this class usually quote a chip and a price. AndroidSBC quotes a configuration: the printer profile, the reader antenna specification, the modem band list, the firmware window and the compliance set for Italy.
- vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
- vs single-configuration boards: twelve configurations share one peripheral contract, so a international market buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
- vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the Italy integrator to manage it.
- vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in international market is the board that ships in volume.
Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends
The payment hardware market that matters to international market buyers is not the card terminal of ten years ago. It is the mixed estate - countertop lanes, unattended kiosks, outdoor pillars and softpos capture - and the board that serves all four is the one that wins the Italy programme.
- Countertop tier: WF-SPT-07 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
- Unattended tier: WF-SPT-08 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
- Flagship tier: WF-SPT-11 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.
AndroidSBC positions the WF-SPT family against that reading of the Italy market: one peripheral contract, one Android baseline, one compliance file, so the international market integrator scales without re-qualifying.
WF-SPT-05 Application Scenarios
The WF-SPT-05 dual-screen smart payment terminal build for chain checkout sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-05-A configuration is the typical build for the hypermarket and supermarket chain checkout lanes use case, with printer current profile, scan engine mapping and staged OTA management bundled.
- Convenience and grocery counters: the WF-SPT-01 takes contactless, IC card and QR at the till and prints the receipt in one pass.
- Restaurant and quick-service counters: the WF-SPT-11 runs order entry, payment and kitchen ticket printing on the same board.
- Unattended vending and lockers: the WF-SPT-03 pairs the modem with the printer header and the watchdog for sites with no staff present.
- EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
- Transit gates and event entry: the WF-SPT-11 takes contactless payment and prints the entry ticket without a fixed counter.
- Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
- Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
- Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
- Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.
Partnership Models for international market Buyers
AndroidSBC publishes these three tracks because Italy partners ask the same question in every first call: how much of the work do we take, and how much do you take.
- Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.
The Italy partner that starts on the distribution track and moves to private label does not re-qualify the board, which is the point of holding one peripheral contract across the family.
Frequently Asked Questions
Does the smart payment terminal board family support a dual-screen payment terminal build for chain checkout?
Answer: Yes. The dual-screen payment terminal build for chain checkout is one of the twelve held configurations, which means the bill of materials is frozen for the length of the agreement rather than re-spun between lots in international market.
Which configurations are available in the WF-SPT family for Italy buyers?
Answer: AndroidSBC ships twelve configurations including the RK3576 board: value desktop, 4G unattended, face recognition, dual-screen, kiosk, legacy Android 11, portable 4G, outdoor, hospitality, multimedia and legacy Linux builds.
Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?
Answer: Yes. AndroidSBC validates the panel, the printer and the scan engine together rather than separately, because the combined current draw is what decides whether a terminal survives a shift in Italy.
What payment scheme certification support does AndroidSBC provide for Italy?
Answer: AndroidSBC prepares CE marking with AGCOM radio interface notification documentation and AGCOM conformity files alongside the production order, so the international market acquiring partner receives a file that names the parts on the pallet.
What is the minimum order quantity and the sample lead time for Italy?
Answer: MOQ depends on the track: stock configurations ship from one unit, private-label builds start at 500 boards, and both are quoted against the same frozen bill of materials for Italy.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. Boot logo, custom launcher, kiosk mode and pre-installed applications are all available, delivered as a signed image with a staged OTA plan for the international market estate.
How are firmware updates delivered to aan Italy device estate after deployment?
Answer: Updates are signed, staged and reversible. The international market integrator chooses the group size, and a failed update returns the terminal to the previous image without a site visit.
What shipping terms does AndroidSBC support for Italy orders?
Answer: The Italy lane runs weekly into Port of Genoa, and the international market buyer receives the tracking reference, the packing list and the compliance file at the same time.
Contact AndroidSBC: Start Your WF-SPT-05 Sourcing Conversation
AndroidSBC is taking new Italy partner conversations for the WF-SPT family now. Send the format, the volume and the certification calendar and the engineering team returns a configuration proposal.
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
Wanlin Manufacturing Group builds the WF-SPT family in Shenzhen and exports it through AndroidSBC to Italy and more than 60 markets. international market enquiries for samples, price lists and certification files are answered within one working day.
